BushMaster

After many requests for a larger version of my Bushcraft knife, I came up with the BushMaster. 10″ long overall with a 5″ blade and 5″ handle – it is probably the most capable knife I make and that is why it is at the top of every page. I started this knife in 2008 and it has been a consistent seller with amazing feedback. Much care was put into getting the balance *just right*. I use 1/4″ thick material for handles because it is taller top-to-bottom than my bushcraft knife and has a little more palm swell. This knife features a full flat grind with a larger/deeper set of thumbgrooves. Corby pins and a lanyard tube keep the handle on tight and make this a nearly indestructible knife. Feel free to work this knife as hard as you want. Break it? I’ll replace it FREE of charge.

Blade Specs:

5″ of 3V steel, hardened to 60-61 HRc, 0.22″ thick, Flat grind, Brushed finish on flats, satin-finish on grind, small guard, thumbgrooves, spine rounded at handle front

Handle Specs:

5″ long, made from 1/4″ thick handle material, aluminum corby pin and lanyard tube
All synthetic handles (Micarta, G10, etc) are heavily sandblasted for a super grippy better-when-wet finish
All natural materials are handsanded to 600 grit and then handrubbed with Briwax

Pricing:

Base model = $175

Handle Options:

Natural Canvas Micarta (included in Base Price)
Black Canvas Micarta (included in Base Price)
Green Canvas Micarta = adds $10
Orange G10 = adds $20
Blue G10 = adds $20
Red G10 = adds $20
Blue/Black G10 = adds $30
Black/Tan G10 = adds $30
Cocobolo = adds $30
Arizona Desert Ironwood = adds $80
Arizona Desert Ironwood AAA Burl = adds $120

Add $10 for liners (specify red, black, blue, green, white or yellow)

Sheath Options:

Dual-Carry Leather Sheath (by Butch Hagedorn) = $75
DropLoop Kydex = $55
Kydex = $45
Leather (by JRE) = $50

*Add a Light My Fire Army Model Firesteel for $15
- and a Firesteel loop for $10 (Kydex), $15 (Leather)

Photo Gallery:

[Show as slideshow]